تسجيل الدخول لسرعة الوصول إلى أفضل الصفقات. انقر هنا إذا لم يكن لديك حساب.

Burnishing Tools Information عرض

6 days ago ملابس وموضة مكه   8 الآراء

-- ﷼

  • burnishing-tools-information-big-0
موقعك: مكه
السعر: -- ﷼

Burnishing tools are used to impart a gloss or fine surface finish, often in processes that involve the cold working of metal surfaces. Burnishing tools are also used for the sizing and finishing of surfaces.

FeaturesThe first noticeable difference between abrading and burnishing a surface to accomplish this peak and valley reduction is that the former removes metal from the part while the latter does not. Abrasive finishing cuts or tears away the peaks in the surface, thereby bringing the average peak and valley distances closer together. But Cogsdill says that this also leaves sharp projections in the contact plane of the machined surface. Burnishing doesn’t have this problem. At first glance, a burnished part looks as if the metal surface has been smeared smooth. But that would be incorrect. The burnishing tool’s polished and hardened rollers actually perform cold flowing of the surface and subsurface material, which results in a controlled plastic deformation of the part.

Not What It Looks Like

Material deformation coIn the slideshow above, there is a photo of a sample part, with the unfinished surface on the left and the finished surface on the right. There are a couple things to note here. First, roller burnishing is fast and repeatable; the finish seen above was accomplished in less than 2 seconds. Cogsdill counts the fact that its tools can size, finish and work-harden parts in a single seconds-long operation as a principal benefit over grinding, honing or lapping.

How to Burnish Metal

Burnishing is the process of polishing metal to give it a smooth shiny finish. It is often used on soft metals such as brass or aluminum and is an alternative to diamond dragging.Gundrilling is a deep hole drilling process that uses a long, thin cutting tool to produce holes at high depth-to-diameter ratios. Gundrilling is typically effective in diameters from 1 – 50 mm [~0.04 – 2.00 in]. A gundrill differs from a conventional twist drill by its unique head geometry; a standard gundrill has a single effective cutting edge that removes chips as it advances into the workpiece.